火星磁层顶形成和变化的理论研究

考虑太阳风动压与行星电离层中的带电粒子热压及磁压之和平衡，建立了有大气（电离层）的行星磁层顶形成的理论模型，结合卫星对火星的观测数据，对子午面内向日侧火星磁层顶位形进行了数值计算和分析，研究了火星磁层顶位形及其与太阳风动压之间的变化关系．结果认为，火星磁层顶位形与地球磁层顶相似．太阳风动压越大，火星磁层顶越靠近火星；太阳风动压越弱，火星磁层顶越远离火星．根据火星内秉磁矩从古到今逐渐减小的观点，探索了大尺度磁场（内禀磁矩）对火星磁层顶的贡献作用，结果认为大尺度磁场越强，火星磁层顶越远离行星．这对于进一步研究火星磁层的长期演化以及其他行星磁层的位形变化都具有重要的意义．     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

基于参数化分析的柔性后缘优化设计

介绍了一种自适应柔性机翼后缘变形控制优化设计方法,该方法采用了由单个驱动器驱动的单块式分布柔性结构。该方法的关键在于设计一种合适的柔性后缘结构拓扑形式,使该自适应柔性机翼后缘能够达到精确的变形。阐明了柔性结构拓扑优化设计的数学模型,针对自适应柔性机翼后缘概念设计提出了基于参数化分析的拓扑优化设计方案,并进行了工程化圆整和尺寸优化。最终,通过非线性有限元分析和功能测试,验证了本文提出的柔性后缘优化设计方法的合理性。     

An attempt to study long-term variation of sporadic E layers using neural networks

Strong positive correlation between sporadic E layers and the solar activity and the long-term declining trend of Es were found in this paper. Then the feed-forward back propagation neural networks (NNs) were used to simulate the long-term variation of Es at four stations and predict foEs yearly average values. The inputs used for NNs are the yearly mean values of foEs in the daytime of the past ten years and the yearly averaged data of solar 10.7 cm radio flux (F107) of the present year, and the output is the present yearly mean value of daytime foEs. The outputs of trained NNs have high correlation with the desired values and the foEs yearly mean values predicted by NNs have good agreement with the observed data. The results indicate that NNs can make full use of the observed data to simulate the long variation rule of Es. Also, the results confirm the effect of solar activity on Es.     

鼠笼式弹性支承结构参数分步优化设计方法

为进一步提高鼠笼式弹性支承结构支承刚度设计的准确性,同时最大限度地减小鼠笼受到的最大应力,在相关研究的基础上,基于参数化建模思想,并结合有限元优化技术提出分步优化设计方法.采用鼠笼式弹性支承的刚度和应力计算公式并结合加工装配条件初定1组满足设计要求的结构参数值;建立鼠笼式弹性支承的有限元优化模型,并将初定的结构参数值代入到有限元优化模型作为优化的初始迭代值,同时以鼠笼笼条的长度和厚度为优化参数,经过迭代计算得到满足工程需求的结构参数.该方法可提高设计精度,节省设计时间.最后,结合具体算例验证了优化设计方法的有效性和实用性.     

三叉杆式万向联轴器采用调心轴承时的运动分析

分析了三叉杆式万向联轴器采用调心轴承时输出转角和输入转角之间的关系式,并得出这种联轴器为准等角速传动万向联轴器的结论;讨论了轴偏转角大小对输出输入转角差值的影响,分析表明,这种联轴器中转角差值的变化周期是输入轴自转周期的3倍。     

参数曲线的自适应插补算法

参数曲线插补是高性能ＣＮＣ系统实现复杂轨迹控制功能的重要技术基础。文中提出了一种ＣＮＣ系统参数曲线的实时插补算法，基于参数预估、误差控制及参数校正的策略，实现了参数曲线的高精度快速插补。理论分析与仿真表明，该算法与现有的插补算法相比，不仅速度误差小、实时性好，而且插补速度能随曲线曲率的变化自适应调整，确保加工精度达到给定要求。此外，本算法具有良好的实现通用性，可以适用于样条等各种参数曲线。     

多级最优控制问题的提法与求解变分法的应用

本文讨论多级最优控制问题,给出该问题的数学提法以及变分法求解原理。特别,详细研究了级间分离时刻的连接条件。本文的工作为解决多级最优控制问题提供了途径。     

A non-local vectorial total variational model for multichannel SAR image speckle suppression

This paper aims at the multichannel synthetic aperture radar(SAR)image speckle reduction.This paper proposes a novel energy minimized regularization model for multichannel image denoising,which is an extension of the non-local total variational model for gray-scale image.It contains two terms,namely the vectorial data fidelity term and the non-local vectorial total variation term.The latter is constructed by high-dimensional non-local gradient that contains the structure information of the multichannel image.The existence and the uniqueness of the solution of the model are proved.A fixed point iterative algorithm is designed to acquire the solution of this model.The convergence property of this algorithm is proved as well.This model is applied to the multipolarimetric and multi-temporal RADARSAT-2 images despeckling.The result shows that this model performs better than the original vectorial total variational model on texture preserving.     

高超声速飞行器气动布局和轨道优化研究(英文)

提出了高超声速飞行器参数化模型,并在此基础上通过快速、高效的工程方法开展了初步的气动力计算。以类HTV-2布局为对象,开展了以升阻比和容积率为设计目标的气动布局优化研究;以类X-37布局为对象,开展了以航程和驻点总加热量为设计目标的弹道优化设计。采用加权求和的方法求解多目标优化问题。研究表明,通过优化可获得设计目标权重取不同值时的优化结果,各优化结果具有明显的不同,具体将哪一个优化结果作为最终的选择,主要依赖于设计者的需求。